User guide

Upgrading System Software
Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 40
8.5.3 Locating System Software Files
• Use the browser to locate the System Software files for the Display
Board BSR-310 (does not apply to the Controller BC-320).
Click on the search box to search for the opeq_
bin file in the dialog
box, then press Open.
• Use the browser to locate the System Software files for the
Processor Board EAC-300 (does not apply to the Operator Panel
BS-330, Repeater Panel BU-320 and Information Panel BV-320).
Click on the search box to search for the facs_
bin file in the dialog
box, then press Open.
8.5.4 Downloading System Software Files to the Display Board
• Make sure that the jumper positions and computer connection are
correct (refer to Jumper Positions and Computer Connections).
• Click on the Program button to download the opeq_bin file(s) to
target, i.e. the Display Board (does not apply to the Controller BC-
320).
• Observe the progress (0-100%) on the status line
shown on the computer screen. (AutroSafe Download Tool).
• Click OK when the procedure is completed.
• Remove the computer cable from the connector on the circuit
board.
8.5.5 Downloading System Software Files to the Processor Board
• Make sure that the jumper positions and computer connection are
correct (refer to Jumper Positions and Computer Connections).
• Click on the Program button to download the facs_bin
file to target,
i.e. the Processor Board (does not apply to the Operator Panel BS-
330, Repeater Panel BU-320 and Information Panel BV-320).
• Observe the progress (0-100%) on the status line
shown on the computer screen. (AutroSafe Download Tool).
• Click OK when the procedure is completed.
• Remove the computer cable from the connector on the circuit
board.