User guide

Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 28
4.3.8 If the Configuration Data Must be Reconfigured
If the distributed system has been changed in some way, for example,
new system units or loop units have been added, the configuration
data must be reconfigured according to the changes.
When you have completed the reconfiguring, do the necessary tasks:
• generate the new configuration files
• use the ConfigProgrammer to download the new configuration files
to target
• repeat the entire booting procedure for all system units on the
AUTROLON ring.
Before reconfiguring the ac-file or mbd-file (this file is the
original file you use when you configure the AutroSafe
configuration data) always do the following:
• On your local computer, create a new directory for the new
ac-file (plus Installation/Config_Bin)
• Start the AutroSafe Configuration Tool, then open the
ac-file that is to be reconfigured.
• Go to the File menu, click Save As, and save the ac-file with a
new name under the new directory you have just created.