User guide

Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 19
4.2.6 Examples of Addressing
Example 1:
A Fire Alarm Control Panel is to be given System ID = 01.
The correct hexadecimal numbering on the rotary switches on the
Display Board BSR-310 is shown on the drawing below.
Example 2:
The Fire Alarm Control Panel is to be given Ring ID = 01
The correct hexadecimal numbering on the rotary switches on the
Operator Board BSZ-310 is shown on the drawing below.
Example 3:
The Repeater Panel is to be given System ID = 61
The correct hexadecimal numbering on the rotary switches on the
Display Board BSR-310 is shown on the drawing below.
1
0
0
1
1
6
S102
S17
S102
S101
S16
S101
Read from left towards right
Read from left towards right
Read from left towards right