User guide

Error! Style not defined.
Error! Unknown switch argument., AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE-LV/FE, Rev. A, 033105,
Autronica Fire and Security AS
Page 13
4.2.1 Select Loop Driver
The Select Loop Driver button allows you to select the loop driver
module (BSD-310 / BSD-311) for the loop to be looked at. By default,
loop driver 1 (LD1) is selected, but the user can select any other
module. Only loop drivers of the type BSD-310 or BSD-311 will be
correctly handled by the LoopViewer although all modules found will
be shown in the Select Loop Driver window.
Pressing the Search Loop Drivers button forces the LoopViewer to
find all loop drivers.
If there are several loop drivers or other modules available, the user
must select the one to which the actual loop is connected.
When pressing the START button (see next chapter) a graphical
presentation of the selected module will appear. The examples below
show two different presentations.
Example: A Loop Driver BSD-
310 has been selected
Example: Communication Module BSL-310 has
been selected
As shown in the example, the LoopViewer is not able to
present the topology for the modules BSL/BSB/BSJ-310.