User guide

Show Unit Properties
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 58
14.5 Points
Using the Enter button after selecting a point reveals the following
properties:
 name of the point
 override Delay and Dependency (YES or NO)
In an alarm situation, the actioning of outputs will be delayed when;
the detection zone has been defined as a Delayed Action detection
zone (configurable) and the point(s) in this Delayed Action
detection zone has not been set to Override Delay and
Dependency, i.e. set to No.
 performance class day setting (Normal 1, Normal 2; Industrial;
depending on the type of detector)
 operation class day setting (MultiSensor with heat, MultiSensor
only, Heat only)
 performance class night setting (Normal 1, Normal 2; Industrial)
 operation class night setting (MultiSensor with heat, MultiSensor
only, Heat only)
Using the Function button
after selecting a point gives the
following menu selections:
 Show Connected Units
14.6 Fire Alarm Device
Using the Enter button after selecting a fire alarm device reveals
the following properties:
 Name of the Fire Alarm Device
 Unit function
 Hardware Type
Using the Function button
after selecting a fire alarm device gives
the following menu selections:
 Show Connected Units