User guide

System Status
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 45
 To enter the System Status menu, press the Enter button
 To select Alarms, press the Enter button
The total number of detection zones (in this example, 2) in alarm state
is shown in the upper right corner of the display.
 Use the arrow down button to scroll down and select a detection
zone.
 To view detailed information for a point, press
 Use the arrow down button to scroll down and view all information.
 To return to Operation Mode, press and hold down the Enter button
for a few seconds.