Specifications

Exporting / Importing
Configuration Data
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-INSTALL/DGB Rev. E, 2011-08-16,
Autronica Fire and Security AS
Page 63
13.7 Save Configuration
Each time a configuration has been changed, this command should
be run. The changes will not become effective until a Restart System
command is performed.
From the Service Menu, perform the following:
 Press Enter to select System Settings.
 Press Enter twice to select Save Configuration.
 Type a new Site Name, or accept the existing one by pressing the
arrow down button.
 Type a new Operator Name, or accept the existing one by pressing
the arrow down button.
 Press Enter to type a new Site Configuration Version then press
Enter, or accept the existing one by pressing the arrow down
button.
 Press Enter to type a new Description then press Enter, or accept
the existing one by pressing the arrow down button.
 To confirm, press Enter.
