Specifications

Switches and Indicators on
the Main Board
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-INSTALL/DGB Rev. E, 2011-08-16,
Autronica Fire and Security AS
Page 57
12.6 System Fault LED indicator (yellow)
The yellow System Fault indicator is lit if a system fault occurs. The
board enters this security mode if the main processor fails to function
due to hardware problems on the main board, programme faults or
faults in the file system. If such a fault occurs, the reset switch (S1)
has to be pressed to regain normal operation of the board. If it is not
possible to regain normal operation, the board must be replaced.
12.7 Status LED indicator (red)
Not in use.
12.8 Power LED indicator (green)
The green Power LED indicator is lit when the main board is supplied
with the correct power (3,3VDC and 5VDC).