Specifications

Startup
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-INSTALL/DGB Rev. E, 2011-08-16,
Autronica Fire and Security AS
Page 53
Step Actions to be taken
5
 Turn the key clockwise.
 To enter Service Mode, press and hold down the Enter button for a few seconds.
 Use the Arrow down button to select Service, then press Enter.
 Select System Settings (the uppermost menu selection which is highlighted), then
press Enter.
 Select Save Configuration (the uppermost menu selection which is highlighted),
then press Enter twice.
 Type the Operator Name, then press Enter.
 Type the Site Configuration Version, then press Enter.
 Type a Description, then press Enter.
 Press Enter once more to confirm.

 Use the Arrow down button to select Restart System.
 Use the left Arrow button to select Accept, then press Enter.
 The message “System is now shutting down…” will appear, and the system will
reboot automatically.
The system topology is shown in the display. Press the Cancel/Back button to reveal the idle
display.
The system now functions with the default configuration. Site-specific
configuration can now be carried out. For details on system
configuration and examples on how to configure a site-specific
configuration, refer to the Configuration Handbook.