Specifications

Cable Connections
Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-INSTALL/DGB Rev. E, 2011-08-16,
Autronica Fire and Security AS
Page 40
9.11.1 Terminal Points – Overview
BUR-200
MIMIC
DRIVER
Switch S2
Mode switch
If external power is not used , a
strap should be mounted
between terminals 1 and 2 on
connector J12 in order to avoid
an unnecessary fault message
which will otherwise appear
after commissioning.
Pay attention to the location of
the connectors (J).