User guide

Operation
7.4.3 Set Alarm Limits
The Set Alarm Limits command allows you to change a gas detector’s
alarm limit for Low Alarm and High Alarm.
System Description, AutroSafe Integrated Fire & Gas Detection System, 116-P-ASAFE-IFG/XE Rev. B, 2005-10-27,
Autronica Fire and Security AS
Page 66
Step Actions to be taken Display Indication
1
To enter the Main Menu, press
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE

SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS COMMANDS
2
To select SERVICE, press 5.
SERVICE
19:23
OIL&GAS COMMANDS
1 INHIBIT POINT
2 CANCEL INHIBIT POINT
3 SET ALARM LIMITS
4 GET MEASUREMENT VALUES
3
To select OIL & GAS COMMANDS, press 4.
SERVICE
19:23
SET ALAR M LIMITS
Name: _
Gas Detector Interface
Type:
4
To select SET ALARM LIMITS, press 3.