User guide

System Hardware

4.2.5 Connection between EAU-321 and EAU-341

Communication Cable XBA-055 is used between the Serial

Communication Board EAU-321 and AutroFieldBus Driver Board

EAU-341. An alternative is to use the break-out box (Autronica Fire

and Security article no 7366-001.0020)

EAU-341

AutroSafe EAU-321

via ribbon cable and termination

block

EAU-341 Panel communication

PORT 0

Terminal

block (AFS

art no:

7366-

001.0020)

EAU-341

AutroSafe EAU-321

via XBA-055

PORT 0

COM3 in

AutroSafe

EAU-321

(Com 3/4)

Ribbon

cable

Max 3m cable length

XBA-055 Max 3m cable length

See also datasheets for EAU-321 and EAU-341.

4.2.6 Capacity / Limitations

• If the cable is armoured, this should be connected to the

protective earth (PE) at both ends.

• Maximum one EAU-341can be used for each panel.

• Maximum 31 AutroFieldBus units can be connected to the

AutroFieldBus.

• Maximum cable length between the EAU-321 and

EAU-341board is 3m. The cabling must be within the same

encapsulation.

• See also datasheet for EAU-341.

System Description, AutroSafe Integrated Fire & Gas Detection System, 116-P-ASAFE-IFG/XE Rev. B, 2005-10-27,

Autronica Fire and Security AS

Page 16