User guide

System Hardware
4. System Hardware
4.1 System Panels
System Description, AutroSafe Integrated Fire & Gas Detection System, 116-P-ASAFE-IFG/XE Rev. B, 2005-10-27,
Autronica Fire and Security AS
Page 11
System Units on
AUTROLON
Main Function Description
Fire Alarm
Control Panel
Power
Fire Brig . re cvd.
Fire vent. activ.
Fire ext.. acktivated
0
ALARM
?
C
987
6
54
3
21
Silence buzzer
Silen ce soun der s
Reset
More Alarms
Prewarni ng
Early warning
System fault
Function disabled
Test
Fault
Self Verify
BS-
310G (G2*)
320G (G2*)
(* SIL2)
BS-310G / 320G is a
complete fire alarm
control panel with full
operating capabilities.
The panel serves as a
operating panel for
one or several defined
operation zones.
All alarm handling and
system features can
be controlled and
monitored from the
panel.
The panel can accommodate up to a maximum of
12 modules. The system offers Loop Driver
Modules (maximum 6) for detection loops and
several types of I/O modules for monitored
outputs, open collector outputs, galvanic isolated
inputs and monitored inputs.
With a LON interface the control panel can
communicate with other system units on the local
operating network, AUTROLON. This interface is
standard in BS-320G, and not included in BS-
310G.
Absence of the AUTROLON interface in BS-310G
makes it possible to use the BSD-320 interface
with this unit.
The operator panel is menu operated on a 16
lines display with 40 characters per line. A built-in
printer is available.
The unit has a 220 VAC / 3A power module for
battery charging and a built-in emergency battery.
Operator
Panel
Power
Fire Brig . re cvd.
Fire vent. activ.
Fire ext.. acktivated
0
ALARM
?
C
987
6
54
3
21
Silence buzzer
Silen ce soun der s
Reset
More Alarms
Prewarni ng
Early warning
System fault
Function disabled
Test
Fault
Self Verify
BS-330
The Operator Panel
serves as a operating
panel for one or
several defined
operation zones.
All alarm handling and
system features can
be controlled and
monitored from this
panel.
The panel communicates with Controllers and the
entire system via the AUTROLON local operating
network.
The operator panel is menu operated on a 16
lines display with 40 characters per line. A built-in
printer is available.
External 24V supply is required.
Controller
Power
Self Verify
BC-320
The Controller serves
as a connection unit
for Loop Driver
Modules, I/O modules
and power supply.
The unit can accommodate up to a maximum of
12 modules. The system offers Loop Driver
Modules (maximum 6) for detection loops and
several types of I/O modules for monitored
outputs, open collector outputs, galvanic isolated
inputs and monitored inputs.
The unit has a 220 VAC / 3A power module for
battery charging and a built-in emergency battery.
Repeater
Panel
INFORMASJONSPANEL
Reset
Silence sounders
More Alarms
Silence buzzer
Power
Fire vent. a ctiv.
Fire ext. a ktivated
Fire Brig. recvd.
ALARM
BU-320
The panel allows you
to operate alarms
related to the relevant
operation zone.
The panel is used to silence sounders and to
reset alarms within a defined operation zone. The
whole system can be reset from this panel,
provided that the panel's relation to the operation
zone is defined this way.
The display has space for 16 lines at 40
characters per line and shows detailed
information on alarms.
External 24 VDC Power is required.
The panel offers buttons for scrolling through
events and a button for silencing the internal
buzzer.
The panel serves as
an indication device
only. It provides
Information
Panel
INFORMASJONSPANELALARM
More Alarms
Silence buzzer
Power
Fire vent. activ.
Fire ext. aktivated
Fire Brig. recvd.