Specifications

Introduction
Interfacing BU70 Display Units and BU100/BU101 Panels, AutroSafe Interactive Fire-Alarm System,
116-P-BSL337/EE, Rev. D, 2007-01-25,
Autronica Fire and Security AS
Page 3
1. Introduction
1.1 About the Handbook
This handbook provides all necessary information required to
interface BU-70 display units and BU-100/BU-101 parallel operation
panels in the BS-100 system to AutroSafe Fire-detection systems.
The BU-70 display units and BU-100/BU-101 parallel operation panels
are referred to as BU-panels in this handbook.
The purpose of the AutroSafe BU-70 Interface BSL-337 (hereby
called the BSL-337 interface) is to convert data transmitted from
AutroSafe, via a RS-232 serial connection using the AutroCom
protocol, into the proprietary communication protocol ASSP (Autronica
Standard Short Protocol for BU-panel communication).
In this way, information from the AutroSafe system can be shown on
displays on BU-panels, and RESET and SILENCE commands can be
sent from BU-100/BU-101 panels to the AutroSafe panel.
1.2 The Reader
This handbook is designed for use by Autronica Fire and Security
service personnel.
1.3 Reference Documentation
In addition to this handbook, Autronica Fire and Security offers the
following documentation:
Documentation Product Part number
Datasheet AutroSafe BU-70
Interface BSL-337
116-P-BSL337/CE
Datasheet (included
in Appendix)
RS-232/Current Loop
Interface BSL-12/2
116-P-BSL12/2/CE
Datasheet (included
in Appendix)
Data Communication
Line Splitter
116-P-KDL26B/CE
Installation,
Commissioning and
Operator’s Handbook
Display Unit BU-70 116-P-BU70/IE
Installation,
Commissioning and
Operator’s Handbook
Parallel Operation
Panel BU-100 and
BU-101
116-P-BU100/EE