Specifications

Configuring the AutroSafe
System
5. Configuring the AutroSafe
System
5.1 Introduction
AutroSafeConfig
Power
Fire Brig. recvd.
Fire vent. activ.
Fire ext.. acktivated
0
ALARM
Interfacing BU70 Display Units and BU100/BU101 Panels, AutroSafe Interactive Fire-Alarm System,
116-P-BSL337/EE, Rev. D, 2007-01-25,
Autronica Fire and Security AS
Page 24
?
C
98
7
6
5
4
3
21
Silence buzzer
Silence sounders
Reset
More Al arms
Prewa rning
Early warning
System fau lt
Function disabled
Test
Fault
Self Ve rify
Cable XJA-033
Cable XJA-029
The procedure deals with the configuration of the AutroSafe
Interactive Fire Alarm System. The AutroSafe Configuration Tool is
used for this purpose.
The chapter includes the following:
• Configuring the AutroSafe System
• Connecting the cable for downloading
• Downloading the AutroSafe Configuration
5.2 Configuring the AutroSafe System
The necessary configuration of the AutroSafe includes the following:
• From the Main Menu in AutroSafe Configuration Tool, click on
View and select System (System View).
• In the Tree View on the left side of the screen, click on the Panel
(BS-310/-320) where the AutroCom Serial is to be added.
Note: Make sure that the selected panel is actually the one where
the Serial Port Communication Board EAU-321 is mounted.
• Right-click the mouse and select Add.