Specifications

BSL_337 Installation
4.2.2 Mounting the Current Loop/RS-232 Converter BSL-12/2
The Current Loop/RS-232 Converter BSL-12/2 has configurable
inputs and outputs. The converter is delivered as a separate circuit
board on a bracket prepared for mounting on a standard TS-35 rail.
55mm
135mm
77,5mm
4.2.3 Connections between the Current Loop/RS-232 Converter BSL-12/2
and BU-panels
All cables are connected to screwterminals.
If a system consists of more than one BU-panel, the BU-panels are
interconnected. For this information, refer to cable connections for
BU-70, BU-100/BU-101 described in the BS-100 documentation.
Interfacing BU70 Display Units and BU100/BU101 Panels, AutroSafe Interactive Fire-Alarm System,
116-P-BSL337/EE, Rev. D, 2007-01-25,
Autronica Fire and Security AS
Page 21