Specifications

Installation
3.6 Standard Communication Parameters
The BSL-337 is delivered from the factory containing the following
communication parameters:
• Port 0, to BU-70: 1200 baud
• Port 1, to AutroSafe: 9600 baud, 8 databit, none parity, 1 stop bit
3.7 EAU-321 Serial-Port Communication Board
The BSL-337 requires that the EAU-321 Serial-Port Communication
Board is installed in the relevant AutroSafe panel; this allows the
AutroSafe panel to communicate with BSL-337 using RS-232 on port
1 or 2.
The EAU-321 Serial-Port Communication Board, when installed, is
located as per figure:
Communications boards:
LON-Interface board EAU-310 (if installed)
Serial-Port Communication Board EAU-321
Panel front
Processor
board
Interfacing BU70 Display Units and BU100/BU101 Panels, AutroSafe Interactive Fire-Alarm System,
116-P-BSL337/EE, Rev. D, 2007-01-25,
Autronica Fire and Security AS
Page 14