User Guide

To save an image without saving your drawing

1 Click Image menu ➤ Save.

2 Select the image(s) you want to save.

NOTE You can also select the image first, and then right-click to display the

shortcut menu where you can select Image ➤ Write ➤ Save.

3 Press Enter to complete the selection set.

The image(s) you selected are saved.

If any of the images you select are unnamed, then the Save As dialog box

is displayed so you can give the image a name, location, and file type.

For more information, see Saving an Image to Another File Name, Type,

or Location (page 43).

If your image does not save correctly, verify the following

■ No copies of the image exist in other drawings.

■ The URL address you specified is correct.

■ The read-only attribute is not set on your disk.

NOTE Raster Design uses Single Image Optimization (page 396) to speed up the

editing commands.

Quick Reference

Image ➤ Save

Toolspace Shortcut Menu

Image Insertions view, image ➤ Write ➤ Save

Object Shortcut Menu

Image ➤ Write ➤ Save

Raster Design Toolbar

40 | Chapter 3 Saving Images