User Guide

To create a block of multiline vector text
1 Click Image menu ➤ Vectorization Tools ➤ Multiline Text.
2 Enter a point to specify the first corner of the text box.
3 Enter a second point to define the angle of the baseline.
4 Enter a third point to define the extents of the Mtext box.
The Text Formatting dialog box is displayed. This is formally known as
the AutoCAD In-Place Text Editor.
5 Enter the replacement vector text in the In-Place Text Editor, and review
text properties to ensure they are correct. For more information, click
and click Learn About MTEXT.
6 Remove the original raster text. Do one of the following, depending on
the VTools Removal Method specified in the Raster Design Options dialog
box:
■ If None, press Enter to end the command.
■ If Rub, click points to create the removal region. For more information,
see Rubbing Raster Data Within a Rectangular Region (page 155).
■ If REM, define a removal region around the raster text. For more
information, see Defining REM Enhanced Bitonal Regions (page 176).
Quick Reference
Menu
Image ➤ Vectorization Tools ➤ Multiline Text
Raster Design Toolbar
Command Line
vmtext
Creating Multiline Vector Text | 229