User Guide

■ To match the length of an existing vector line, enter m, then select the
vector line.
■ To use a length from the Most Recently Used or Most Frequently Used list
(depending on your settings in the Raster Design Options dialog box),
right-click, then click a value on the shortcut menu.
Options for Trimming or Extending a Line
When you select the Trim option, the following prompt is displayed:
Select cutting edge or [Apparent]:
When you select the Extend option, the following prompt is displayed:
Select boundary edge or [Apparent]:
NOTE ProdNameShort trims or extends the line by moving the endpoint.
To either trim or extend the line, do one of the following:
■ To connect the current vector line to an intersecting vector entity, select
the intersecting entity.
■ To end the current vector line at an apparent intersection with another
vector entity, enter a (Apparent) and select YES, then select the other vector
entity.
Quick Reference
Menu
Image ➤ Vectorization Tools ➤ Line
Click Image ➤ Vectorization Tools ➤ Polyline.
Raster Design Toolbar
Vectorize Line
Vectorize Polyline
Command Line
vline
vpline
Vectorizing Raster Lines and Polylines | 211