Owner`s manual

SPECIFICATIONS
MEAN MACHINE AMX200.2
*Audio power output per Channel,
both channels driven at 14.4VDC
-4 Ohms 1kHz 350Wx2CH
-4 Ohms Bridged RMS 1200Wx1CH
*THD
-4 Ohm loads 0.015%
-2 Ohm loads 0.15%
*Signal to Noise Ratio 100dB
*Frequency Response 10Hz-40KHz-1dB
*Crossover: Separate
-High Pass 10Hz-4.0KHz
-Low Pass 10Hz-4.0KHz
-Slope 12dB/Stereo, 24dB/Mono
-Subsonic Filter 10Hz-150Hz
-Bass Boost 0dB-24dB
*Input Sensitivity 0.2V-9.0V
*Low level Input Impedance 47K ?
*Damping Factor 300
*Channel Separation 95dB
*Power Supply Consumption 70A
*(Bridge RMS) 150A
*Fuse Rating 80A
*Dimension (W x 10.4
*Dimension (H x 2.6
*Dimension (L inch) 28.5
*1. These specifications can be changed with notice
*2. Please note that the features shown in this manual may vary from model to model.