Operating instructions

4
LED AND PARKING LIGHT INDICATIONS
STATUS INDICATOR (LED) FUNCTIONS
On Solid = Valet Mode
Slow Flash = System Locked
Rapid Flash w/ Ignition on = Open Hood Warning
Double Flash = Auto Cold Start Mode Activated
PARKING LIGHT FUNCTIONS
On Solid = Vehicle Remote Starting
Flash I x = System Locked
Flash 2x = System Unlocked
TRANSMITTER FUNCTION QUICK REFERENCE
TRANSMITTER OPERATION CHART
Operation System Status Ignition 1st Button 2nd Button
Lock Locked Off Button 1
Unlock Unlocked Off Button 2
Remote Valet Unlocked Off Button 1 Level Shift Button 1
Remote Start Either Off Button 2 Level Shift Button 2
Auxiliary 1 Either Off Button 3 Level Shift Button 3
Stop N Go Unlocked On Button 2 Level Shift Button 2
Car Locator Either Off Button 3 Button 3
*
Auto Cold Start Unlocked On Button 2 Level Shift Button 2
**
* Must press button two times very quickly
** Brake pedal must be pressed while performing button sequence
Level Shift:Pressing and holding a transmitter button for more than one second enters the Level
Shift mode for two seconds. The 1-way transmitter’s LED turns Green to indicate level shift,
while the optional 2-way transmitter plays a chime to indicate level shift. While in level shift
mode,pressing a transmitter button accesses the system’s special features such as Valet,Auxiliary,
etc. After two seconds, the transmitter will automatically exit level shift mode if no other
transmitter button has been pressed.
TURBO TIMER MODE
For vehicles equipped with a turbo-charged
engine,the optional turbo timer feature may be
programmed to run the engine at idle for an
additional period of time after the ignition is
turned off. The run-time may be programmed
for a 1,3, or 6 minute cycle, allowing the turbo
proper time to cool down, extending its life.
To activate the Turbo Timer feature:
1. Make sure the engine is running.
2. Press button 2.
3. Turn ignition off.
• The engine will continue to run for 1,3,
or 6 minutes.
4. Exit the vehicle.
S series.qxd 9/24/2004 11:08 AM Page 4