User

windows - Please refer to your Installer to see If your vehicle Is compatible with this
option.
Basic Vehicle Operations
Function Button pressed Icon Sound Instructions /description
Lock
ri
o
1 beep Lock and arm the starter kill
Unlock
r~^
SI
7^
o
2 beeps Unlock and disarm the starter kill
Trunk or aux3 1 beep Trunk output
Start *
{see runtime
options below)
H + 4
Melody Start the engine
Stop
1
None Melody Stop the engine
Back light
E
On for 5 seconds
Press once
LED or STOP
0
None
LED = 1 beep^l beep
STOP = Melody
Toggles LED ON/ OFF (by default) or
stops the engine {if programmed as STOP
button).
Transmitter Mode Selection
Function Button pressed Icon sound Instructions /description
Power-saving mode
H.(IE+e)
(D
Melody
Press unlock first and then
press the function button and
the ISihiittnn simultaneously.
Vibration mode
Press and hold and
then press
Vibrates 4x
Alarm clock mode
on/off
E.li
‘»sa
Melody
• Press once to have alarm
clock on
• Press twice to have alarm
clock off
Time or Alarm Clock Adjustments
User
Transmitter
1. Press and hold the lE button until a been is heard
-
The backlight will turn on the
moment the E button is
pressed.
2. Upon hearing the beep, release the E button
r n ..
................................. J u ^ IS
displayed
3. Press and hold the IE button once more
4. Release the E button when a beep is heard
............................. SiJc-is
displayed
5. Press and hold the JE button once more until a
beep is heard
6. Release the [E button
............................. 55^ is
displayed
7. At that point, press and hold the E button until 2
beeps are heard.
......... you can now adjust the
hour (current time).
a. Press the button to increase the value or to
activate or deactivate a function or to toggle through
the melodies.
b. Press the ^ to decrease the value or to
activate or deactivate a function or to toggle
through the melodies.
P. 4 User Guide
Multi-Level Features {defaultstate) \
The multi-level features allow you to access different features of your vehicle or of a second car by
pressing the shift button once, twice or three times. By default, the multi-level features are
programmed as follows:
Basic Features {press ibellB button 1X)
............................................................ aux2
IE > ^...................................................................cold weather
Multi-Car Operation {press ibelE button 2X)
E > JE > ^3: ......................... 2"'' car lock
M > E > H: .......................... 2"'' car unlock
IE > E > ^:.................................2"'' car start/stop
|E > E > ............................. 2"''car trunk
Customized Features {press the E button 3X)
(May not be compatible with some vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
M > Ml > ^3: customized feature 1
M > M > S: customized feature 2
M > M > li: customized feature 3
IE >|E > IE > customized feature 4
Accessing the Multi-Level Features and Other Transmitter Functions
• To access a Level 1 feature, press and hold the E button until you hear a “beep”; within three
seconds of hearing the “beep”, release the E button. S 0 ! will be displayed. This display
means that you are now in Level 1. Simply press the corresponding button to access the
desired feature.
• To access a Level 2 feature, press and hold the E button until you hear a “beep within three
seconds of hearing the “beep”, release the lEbutton and press and release the E button
once more. S S2 will be displayed. This display means that you are now in Level 2. Simply
press the corresponding button to access the desired feature.
• To access a Level 3 feature, press and hold the E button until you hear a “beep”; within three
seconds of hearing the “beep”, release the m button and press and release the m button two
more times. S £)? will be displayed. This display means that you are now in Level 3. Simply
press the corresponding button to access the desired feature.
• To access the transmitter functions (clock and alarm adjustments), press and hold the E
button until you hear a “beep”; within three seconds of hearing the “beep”, release the JE
button and press and release the m button three more times. There will be two quick “beeps”
indicating that you are now in the transmitter functions adjustment menu. The Hour position will
be flashing. Simply press and release the m button until you reach the desired location and
proceed with the adjustment by pressing the ^ or libuttons.
Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
User Guide P. 13