Instruction manual

Instruction manual
2954 2370 00 41
7.3.4 Outlet sockets (S)
Outlet sockets QAS 30 Pd
A brief description of all outlet sockets and circuit breakers
provided on the generator is given hereafter:
X2........ 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X4........ 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X5........ 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X6........ 1-phase outlet socket (230 V AC)
Provides phase L3, neutral and earthing.
Q4........ Circuit breaker for X4
Interrupts the power supply to X4 when a short-circuit occurs
at the load side, or when the overcurrent protection (32 A) is
activated. When activated, Q4 interrupts the three phases
towards X4. It can be activated again after eliminating the
problem.
Q5........ Circuit breaker for X5
Interrupts the power supply to X5 when a short-circuit occurs
at the load side, or when the overcurrent protection (16 A) is
activated. When activated, Q5 interrupts the three phases
towards X5. It can be activated again after eliminating the
problem.
Q6........ Circuit breaker for X6
Interrupts the power supply to X6 when a short-circuit occurs
at the load side, or when the overcurrent protection (16 A) is
activated. When activated, Q6 interrupts phase L3 and the
neutral towards X6. It can be activated again after eliminating
the problem.
Outlet sockets QAS 45 - 60 Pd
A brief description of all outlet sockets and circuit breakers
provided on the generator is given hereafter:
X2-X3 .. 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X4........ 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X5........ 3-phase outlet socket (400 V AC)
Provides phases L1, L2 and L3, neutral and earthing.
X6........ 1-phase outlet socket (230 V AC)
Provides phase L3, neutral and earthing.
Q2-Q3.. Circuit breaker for X2-X3
Interrupts the power supply to X2-X3 when a short-circuit
occurs at the load side, or when the overcurrent protection
(63 A) is activated. When activated, Q2-Q3 interrupts the
three phases towards X2-X3. It can be activated again after
eliminating the problem.
Q4........ Circuit breaker for X4
Interrupts the power supply to X4 when a short-circuit occurs
at the load side, or when the overcurrent protection (32 A) is
activated. When activated, Q4 interrupts the three phases
towards X4. It can be activated again after eliminating the
problem.
Q5........ Circuit breaker for X5
Interrupts the power supply to X5 when a short-circuit occurs
at the load side, or when the overcurrent protection (16 A) is
activated. When activated, Q5 interrupts the three phases
towards X5. It can be activated again after eliminating the
problem.
Q6........ Circuit breaker for X6
Interrupts the power supply to X6 when a short-circuit occurs
at the load side, or when the overcurrent protection (16 A) is
activated. When activated, Q6 interrupts phase L3 and the
neutral towards X6. It can be activated again after eliminating
the problem.
X2
Q2
Q6
Q4 Q5
X4
X5 X6
Q6
Q2
Q4 Q5
X6X5X4X2
Circuit breaker Q1 does not only interrupt the
power supply towards X1, but also towards X2, X4,
X5 and X6.
Make sure to switch on circuit breakers Q1, Q4, Q5
and Q6 after starting the generator when power
supply is done by means of X4, X5 or X6.
!