Instruction manual

28 2954 2370 00

QAS 30 - 45 - 60 Pd

2.8 Output terminal board

The output terminal board is situated below the control and

indicator panel.

S2...... Emergency stop button

Push the button to stop the generator in case of an emergency.

When the button is pressed, it must be unlocked, by turning it

anti-clockwise, before the generator can be restarted. The

emergency stop button can be secured in the locked position

with the key, to avoid unauthorized use.

Q1 ..... Main circuit breaker

Interrupts the power supply to X1 when a short-circuit occurs

at the load side, or when the earth leak detector (30 mA) or the

overcurrent protection (QAS 30: 50 A, QAS 45: 63 A,

QAS 60: 100 A) is activated or when the shunt trip is

energized. It must be reset manually after eliminating the

problem.

X1...... Main power supply (400 V AC)

Terminals L1, L2, L3, N (= neutral) and PE (= earthing),

hidden behind the control panel door and behind a small

transparent door.

2.9 Spillage free

A Spillage free skid with forklift slots allows the customer to

transport the generator easily with a forklift.

It avoids accidential spilling of engine fluids.