Installation guide

P. 2 Installation Guide
Table of Contents
Introduction ........................................................2
Included in the Kit ..............................................2
Installation Points to Remember........................3
Harness Description ..........................................4
Flashing the Hood Pin Switch............................9
The Programming Assistance Button..............10
Programming the Transmitter..........................10
Before you proceed .........................................10
The Transmitter Programming Procedure .......10
Entering Programming Options Mode .............10
Multi-Level Features (default state) .................12
Tach Programming ..........................................13
About Tach Programming................................13
Multi-speed Tach Programming ......................13
Automatic Tach Programming .........................13
Tach Adjustments ............................................14
Horn Timing .....................................................14
Testing .............................................................15
Closing Up .......................................................15
Supplementary Information .............................15
Fifth Relay Output (2
nd
IGN, ACC or CRANK).15
Ignition-controlled Door Locks.........................16
Secure Lock.....................................................16
Standard Secure Lock .....................................16
Smart Secure Lock ..........................................16
Lock Pulse Duration ........................................16
Priority Door.....................................................17
Run Time .........................................................17
Starter Kill (Installation) ...................................17
Passive or Active Arming.................................17
Flashing LED ...................................................17
Resetting the Module.......................................17
Events Logging................................................18
Events playback ..............................................18
Start Failure Codes through the Parking Lights18
Diagnostics – Parking Light Flash Table .........19
Introduction
This guide contains all the information relevant and necessary for the installation of the module.
Most of the features of this product are explained in the user guide. Therefore, if you need detailed
information about a feature of the product, we recommend that you refer to the user guide.
Included in the Kit
Please carefully read the installation guide before beginning the installation, especially the harness
description section and the programming options.
It is very important that you familiarize yourself with the programming and the operation of the
module, even if you have already installed a similar module in the past. There are many innovative
features that you may overlook if you do not read this guide.
Prior to the installation, make sure that all the hardware components required to install the system
are in the box.
The following is a list of components included in the kit:
• 1 – remote starter control unit
• 1 – FM long-range transceiver
• 1 – antenna interconnect cable
• 1 – multi-channel 5-button remote control
• 1 – six-pin 14 AWG harness (Ignition Harness)
• 1 – five-pin 18 AWG harness (Main Harness)
• 1 – twelve-pin 22 AWG harness (Accessories Harness)
• 1 – two-pin 22 AWG harness (Accessories Harness)
• 1 – parts bag: a hood pin-switch, a connector and a warning label
• 1 – user guide
The plug-in valet button is not included.