- Autostart, Inc. Network Adapter Product Manual

AS PRG-1000
AUTOSTART TECH TOOL
PRG-1000 Options
• The remote starter can be programmed even when it is solely powered by the
PRG-1000.
• The remote starter or alarm system must be disarmed or in Valet Mode to access
the programmer’s menu. The PRG-1000 displays a “COMMUNICATION
ERROR” message when trying to program an armed unit.
• Select one of the PRG-1000 functions (TACH/Hz, OBDII SCAN, REMOTE,
DIAG., FUNCT, MODULE PROGRAMMING or INSTALLER
PROGRAMMING FILES) to enter its menu.
• Use the “UP” and “DOWN” buttons to scroll the available options.
• Press “ENTER” to access the desired option.
• Repeat the above procedure if there are additional options you would like to
access.
• Press “EXIT” to go back to the preceding option.
• Press “ENTER” followed by “WRITE” to save the new settings into the unit’s
processor. New settings can be saved either one at the time or all at once, after all
changes have been completed.
Buttons & Functions
1. ON/OFF BUTTON
Press the “ON/OFF” button for 1 second to turn the PRG-1000 on.
• You will hear 3 beeps.
To turn it off, press the “ON/OFF” button for 3 seconds.
• You will hear 2 beeps.
The PRG-1000, if operating on its 9-volt battery, will turn off by itself if left unattended
for more than 5 minutes.
The programmer cannot be turned off, and will not automatically turn off, when it is
powered through one of its link cables. As a reminder, 2 beeps will be heard every 5
minutes if the programmer is left unattended.
This tool is made for a 12-volt DC operation. To avoid damages, do not use it with
other types (24-volt DC, 120 AC, etc.) of power sources.
AS PRG-1000
AUTOSTART TECH TOOL
14. Abbreviation Table of Functions and
Options in Short Words
No. Abbreviation Description
1 ACC accessories
2 AUX auxiliary
3 Bsc basic operation
4 Btn button
5 CF car finder
6 Conf confirmation
7 Config configuration
8 Const constant
9 Cus customized operation
10 CWM cold weather mode
11 Dis disarm
12 DomLite dome light supervision
13 DZL diesel
14 F function
15 Gen generation
16 Ide idle
17 IGN ignition
18 LK lock
19 m minute(s)
20 Mcr multi-car operation
21 Mon monitoring
22 ms millisecond(s)
23 Notif notification
24 Pass passive
25 PriorT priority door unlock
26 RS remote start
27 s second(s)
28 SK starter kill
29 SWS swap start
30 Temp temperature
31 Trk trunk
32 Tub turbo
33 ULK unlock
34 V/S voltage sense
35 W/ with
36 W/O without