User guide

P. 6 User Guide
2. Within 3 seconds, press and release the valet button. The parking lights will flash twice and the
L.E.D. will turn itself off.
— The icon will disappear from your LCD remote.
Note: Once valet mode is activated, the remote starter and alarm functions will be disabled.
Ignition Valet
This feature will allow you to remotely put your system into valet mode by using the ignition key
instead of the valet button as above. Ignition valet can be used without a valet button installed.
To put the system i n t o I g n i t i o n valet mode:
• Insert the ignition key into the ignition switch; within 10 seconds, turn the key 5 times
successively into the IGNITION ON / RUN and OFF positions.
• The parking lights will flash three times to indicate that the vehicle is now in valet mode and the
L.E.D. will turn itself on.
— The icon will appear on your LCD remote.
To take the system out of Ignition Valet Mode:
• Insert the ignition key into the ignition switch; within 10 seconds, turn the key 5 times
successively into the IGNITION ON / RUN and OFF positions.
• The parking lights will flash twice to indicate that the vehicle is now out of valet mode and the
L.E.D. will turn itself off.
— The icon will disappear from your LCD remote.
Note: With the ignition valet activated, the remote starter and alarm functions will be disabled.
Start Attempts Indicator (Valet Mode)
This reveals start attempts made while the vehicle was in valet mode. The parking lights will:
• Come ON, go OUT; then
• Flash twice.
Remote Valet Mode
This feature will allow you to remotely put your system into valet mode by using the transmitter
instead of the valet button as above.
Getting i n t o R e m o t e valet mode
• Hold the UNLOCK and START/STOP buttons simultaneously for 3 seconds.
• The parking lights will flash 3 times.
The transmitter will beep once and will display the icon; the LED will remain on solid.
Getting o u t of Remote valet mode
• Hold the UNLOCK and START/STOP buttons simultaneously for 3 seconds.
• The parking lights will flash 2 times.
The transmitter will beep once and the icon will disappear and the LED will turn off.
Note: With the remote valet activated, the remote starter and alarm function will be disabled.
“Home Valet
TM
” Mode
If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if
the vehicle is parked indoors there is no danger of it starting accidentally by remote control. The
system must be in ready mode in order to enter in Home Valet.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote, but the
alarm functions will remain active.
To take the system i n t o home valet mode:
• Press the LOCK or UNLOCK button.
• Within 5 seconds, press the LOCK and START/STOP button simultaneously.