User guide

User Guide P. 17
LCD Transmitter Operation (Second Car Control)
Basic Vehicle Operation
FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION
LOCK
+
1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK
+
2 Beeps
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
START
+
+
Melody Starts the engine
STOP
+
None Melody Stops the engine
TRUNK
+ +
1 Beep
Start and Stop While in Safe Start Mode
FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION
START ON SAFE
START MODE
+ X 2
+
Melody
Press the
and buttons
simultaneously twice within
3 seconds.
Press for 1 second (a melody
will be heard) then press 1sec
and a melody will be heard
again.
STOP ON SAFE
START MODE
+
None Melody
Diagnostics – Chirps Table
Chirps Description
1
• Doors locked, alarm and starter kill armed.
•
LOCK confirmation.
• Entering mode 1 in the programming centre.
• Disarmed notification
2
• Doors unlocked, alarm and starter kill disarmed.
• Transmitter programmed.
• Entering mode 2 in the programming centre.
3
•
LOCK and arm while a zone is left unprotected.
• Entering mode 3 in the programming centre.
• Door zone left unprotected.
4
• UNLOCK and disarm: an intrusion was detected (in warning chirps mode
or full chirps mode).
• Entering tach-programming mode.
• Entering mode 4 in the programming centre.
5
• Siren or horn chirp timing adjustment
Constant up
to 60 seconds
• In siren or horn mode: alarm condition generated by an intrusion, by
panic mode or when the system is powered up. The siren will sound for
60 sec.