User guide

P. 14 User Guide
• The operating range will be somewhat lower on vehicles equipped with an aftermarket or
factory alarm.
Using the Remote Control
The transmitter offers several command-confirmation and timer features. This section explains
some of the key functions available on the remote control. Next section gives a summary of the
button combinations used to access the functions.
Note: If you wish to exit a function, while still in the process of accessing it, simply stop
and wait for at least 10 seconds: the transmitter will return to its normal state.
LCD Transmitter Operation (First Car Control)
Basic Vehicle Operation
FUNCTION BUTTON PRESSED ICON BUZZER
INSTRUCTIONS
/DESCRIPTION
LOCK
1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK
2 Beeps
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
TRUNK or AUX 3
1 Beep Trunk output
START *
(see Runtime
Options below)
+
Melody Starts the engine
STOP
None Melody Stops the engine
AUX 2 or STOP
None
AUX 2 = 1 beep…1 beep
STOP = Melody
Activates AUX 2 (by default) or
stops the engine (if
programmed as
STOP button).
Function Button:
. Turns On the backlight
. For accessing Multi-level
functions
UNLOCK Button:
Unlocks all Doors and
disarms the Starter Kill
TRUNK Button:
Activates the Trunk
out
p
ut
(
AUX 3
)
LOCK Button:
Locks all Doors and
arms the Starter Kill
START/STOP Button:
. Starts or Stops the engine (Normal functions)
. Starts the engine ONLY (if the Auxiliary Button is
programmed as STOP Button)
AUXILIARY Button
. Activates AUX 2
. Or Stops the engine (If
programmed as Stop
Button)