User guide

ManualsBrandsAutostart ManualsAutomotiveAS-6650TW-FM

User Guide P. 11

o Press the button for 1 second and release; you will hear a beep. L-01 will appear

on the screen.

o Immediately press the

button and hold it until the temperature is displayed on the

LCD screen.

Note: to change the temperature from Celsius to Fahrenheit, press

+ + simultaneously.

Multi-car Operation

This option allows the owner of two vehicles, both equipped with System systems, to control both

systems with a single remote control. To control the second vehicle:

• Press TRUNK + LOCK buttons simultaneously: .................... LOCK

• Press TRUNK + UNLOCK simultaneously: ............................ UNLOCK

• Press TRUNK + START/STOP simultaneously: .............................START

• Press TRUNK + START/STOP simultaneously: ...................... STOP

• Press SHIFT ¾ SHIFT ¾ TRUNK:............................................ TRUNK

• Press SHIFT ¾ SHIFT ¾+ LOCK: ........................................... LOCK

• Press SHIFT ¾ SHIFT ¾ + UNLOCK: ...................................... UNLOCK

• Press SHIFT ¾ SHIFT ¾ + START/STOP:..........................................START

• Press SHIFT ¾ SHIFT ¾ + START/STOP:................................. STOP

• Press SHIFT ¾ SHIFT ¾ + TRUNK:......................................... TRUNK

Note: Your remote control must be configured for second car operation by the installer.

Note: In order to access the 2

car operations with the companion remote, Shift button must be

pressed twice quickly and then one more time followed by

LOCK, UNLOCK, TRUNK or START/STOP.

Missing a Start or a Stop Confirmation

If you have not received a Start or the Stop confirmation after pressing the START/STOP button,

simply press the

LOCK button. Pressing the LOCK button will refresh the display and will confirm if

the vehicle was started or stopped.

The Start Confirmation Was Not Received

If after remote starting the vehicle no confirmation was received, simply press the LOCK button,

this will refresh the display. If the vehicle was started successfully, the smoke icon and the

hourglass icon will appear as well as the run time countdown. Pressing the LOCK button will also

lock all doors (the lock icon will appear). If the doors were already locked prior to pressing the

LOCK button, there will be no change in the status of the doors i.e. the doors will remain

locked.

• On models where starter kills were installed, pressing the LOCK button will

also activate the starter kill.

• On alarm models, pressing the LOCK button will also activate the monitoring.

The Stop Confirmation Was Not Received

If after remote stopping the vehicle no confirmation was received i.e. the display did not return

to its basic state simply press the LOCK button, this will refresh the display. If the engine was

stopped, the smoke icon and the hourglass icon will disappear and the time will be displayed.

Pressing the LOCK button will also lock all doors (the lock icon will appear). If the doors were

already locked prior to pressing the LOCK button, there will be no change in the status of the

doors i.e. the doors will remain locked.

• On models where starter kills were installed, pressing the LOCK button will

also activate the starter kill.

• On alarm models, pressing the LOCK button will also activate the monitoring.