Operating instructions

Communication protocol Commands
KNF Flodos CP_SIMDOS02_EN_01_166851 41
9.1.27 Pump address nn
Sets the pump address for serial interface commands.
ADnn
AD
nn (2 digits, right adjusted)
AD10 ⇒ Set the network address of the pump to 10
nn Function
00 ... 98 Pump address
?AD
nn (2 digits, right adjusted)
Transmit ?AD
Receive 10 ⇒ The network address of the pump to 10
nn
Meaning
00 ... 98 Current Pump address
Display on Pump User Interface:
No display
Value of AD is saved
Value of AD is saved
The external control program has to use the correct (modified)
address to send commands to the pump.
Address 99 is reserved for commands that shall be executed
synchronously by every pump in the network.
Summary:
Set command
Command string:
Parameter name:
Parameter value:
Example:
Read command
Command string:
Answer:
Example:
Power OFF behavior:
Auto-start Power OFF behavior:
Remarks: