Operating instructions

General Communication protocol
4 KNF Flodos CP_SIMDOS02_EN_01_166851
2 General
The SIMDOS RC Plus pumps can be controlled by using the
standard RS232 serial interface (COM1, COM2, … ). The RS232
serial interface allows one pump to be controlled by a PC based
software tool. Any of the commands listed in this document can be
carried out as single commands for pump control or verification
purpose. This may be of help for customers, who want to develop
their own pump control tool.
If your PC does not provide an RS232 serial interface, then use an
USB to RS 232 Adaptor!
The communication protocol is only available for the following
products:
Name KNF Typ
SIMDOS 10 XX RC Plus FEM1.10 XX.18 RCP
SIMDOS 02 XX RC Plus FEM1.02 XX.18 RCP