Operating instructions

Commands Communication protocol
38 KNF Flodos CP_SIMDOS02_EN_01_166851
9.1.25 Pump reset to factory settings
This function brings the pump back to the factory settings.
• All the modified custom settings except pump address will
be set back to the factory settings.
• Any custom calibration values will be set back to the facto-
ry calibration values.
IP
IP
no parameter value
IP ⇒ Pump will be set to factory settings
No command string
--
--
Display on Pump User Interface:
No Display
Display
-No changes
-The pump parameters are set to default value.
--
--
--
Summary:
Set command
Command string:
Parameter name:
Parameter value:
Example:
Read command
Command string:
Answer:
Example:
Power OFF behavior:
Auto-start Power OFF behavior:
Remarks: