Operating instructions

Commands Communication protocol
10 KNF Flodos CP_SIMDOS02_EN_01_166851
9 Commands
9.1 Function list
9.1.1 Mode select: Run-mode / Dispense-mode .................. 11
9.1.2 Start, Stop, Prime/Drain ................................................. 12
9.1.3 Run mode flow rate µl/min. ............................................ 13
9.1.4 Dispense mode dispense volume
µ
l ............................ 15
9.1.5 Dispense mode time for dispensing a volume .......... 16
9.1.6 Dispense mode: number of volumes ........................... 18
9.1.7 Dispense mode: Break time between volumes.......... 19
9.1.8 Actual run or dispense time counter. .......................... 20
9.1.9 Actual run or dispense volume counter µl ................. 21
9.1.10 Analog control signal type selection ........................... 22
9.1.11 Analog Range Selection ................................................ 23
9.1.12 Digital input 1 function ................................................... 24
9.1.13 Digital input 2 function ................................................... 25
9.1.14 Open collector output function .................................... 27
9.1.15 Language select .............................................................. 28
9.1.16 Customer level measured calibration volume ........... 29
9.1.17 Customer level calibration factor % ............................ 30
9.1.18 Characteristic pump profile selection ......................... 31
9.1.19 LCD display contrast ...................................................... 32
9.1.20 Auto-start after power on ............................................... 33
9.1.21 Pump model and firmware version .............................. 34
9.1.22 Communication check function ................................... 35
9.1.23 Protocol answer setting ................................................. 36
9.1.24 Initialize the pump (new start) ....................................... 37
9.1.25 Pump reset to factory settings ..................................... 38
9.1.26 Pump status request ...................................................... 39
9.1.27 Pump address nn ............................................................ 41
9.1.28 Maintenance position ..................................................... 42