Product data

Step 17. If the 2104 is attached to a RISC system, go to step 18. Otherwise, go to
step 19.
Step 18. The disk drive that you have just installed has been configured with new
hdisk numbers. If you want to change those numbers, go to “Configuring a
Disk Drive Module to the Using System” in “Appendix A. Additional
Information for RISC Systems”. Otherwise, go to step 19.
Step 19. If you came to this section from a step in MAP, return to that step, and
continue with the MAP. Otherwise, go to “MAP 2410: 2104 – Repair
Verification” on page 65 to verify the repair.
84 2104 Service Guide