Product data
MAP 2410: 2104 – Repair Verification
This MAP helps you to verify a repair after a FRU has been exchanged for a new one.
Attention: Unless the using system needs to be switched off for some other reason, do
not switch off the using system when servicing the 2104 or any of its SCSI devices.
Power cables and external SCSI cables that connect the 2104 to the using system can
be disconnected while that system is running.
Step 1.
Ensure that the DC On/Standby switch of each fan-and-power-supply
assembly is set to On.
Are all Check lights off?
NO Go to “MAP 2010: 2104 – START” on page 44.
YES Go to step 2.
Step 2. (from step 1)
Can the using system get access to all SCSI devices?
NO Go to “MAP 2010: 2104 – START” on page 44.
YES The repair is complete.
Chapter 2. Problem Determination Procedures 65