Product data

Configurations That Are Not Valid for 2104 Models DU3 and TU3
This section gives some examples of configurations that are not valid.
Two Adapters in One Using System Connected to One 2104
1 SCSI interface card assembly
2 SCSI adapter. This configuration is not valid for any type of adapter.
Note: This configuration is not valid only when the 2104 is configured in single-bus
mode. It is, however, valid when the 2104 is configured in dual-bus mode (see
Two Adapters in One Non-HACMP Using System Connected to One 2104
(Model DU3 or TU3)on page 152).
Figure 72. Two Adapters in One Using System Connected to One 2104 (Single-Bus
Mode). This configuration is not valid.
Appendix B. Cable Configurations 157
|
|
|
|
|
|
||
||
|
|
|
|
|
|
|
|
|
|
|