Product data
Examples of Dual-Bus Mode Configurations
For a dual-bus mode configuration, the SCSI Bus Split switch on the switch card
assembly of a 2104 Model DU3 or TU3 must be set to On.
Each 2104 in the configuration is connected either to one external SCSI connector on
an adapter, or to an integrated SCSI port that is in the using system. If an adapter has
four external SCSI connectors, up to four 2104s can be connected to it.
The external SCSI connectors can be either on the same adapter, or on two separate
adapters. If the connectors are on two separate adapters, these two adapters can be
either in the same using system, or in two separate using systems.
Appendix B. Cable Configurations 151
|
|
|
|
|
|
|
|
|