Product data

Location Code Format
Location codes identify the locations of adapters and devices in the using system and
its attached subsystems and devices. These codes are displayed by the service aids,
and when the diagnostic programs isolate a problem. For information about the location
codes that are used by the using system, see the Operator Guide for the using system.
This section shows the location codes for the 2104.
AB-CD-EF-GH
││ ││ ││ ││
│ │ │ │ │ │ │ └──── Always 0
││ ││ ││ │
│ │ │ │ │ │ └────── SCSI address of the device
││ ││ ││
││ ││ ││
│ │ │ │ │ └────────── Adapter connector number.
││ ││ │
│ │ │ │ └──────────── Always 0
││ ││
││ ││
│ │ │ └──────────────── Adapter position (number of the slot containing
│ │ the SCSI adapter on the using-system I/O bus)
││ │
│ │ └────────────────── Using-system I/O bus identifier
││
│ └────────────────────── Always 0
└──────────────────────── System Unit Identifier
Appendix A. Additional Information for RISC Systems 133