Product data

Step 3. Refer to Figure 54.
Step 4. At the back of the 2104, loosen the two back mounting screws 1.
Step 5. Attention: Do not push the frame assembly too far forward.
Push the frame assembly forward approximately 5 cm (2 in.).
Step 6. Go to the front of the 2104.
Step 7. Note: For a translation of the following notice, see “Appendix D. Translated
Safety Notices” on page 167.
CAUTION:
Do not attempt to lift the 2104 by yourself. Ask another person for aid.
Attention: When you remove the frame assembly from the deskside unit,
ensure that you pull the metal brackets that are behind the plastic bezel (see
Figure 52 on page 110). Do not pull the bezel: it will break.
With aid from another person, pull the frame assembly forward and remove it
from the deskside unit.
Figure 54. Removing the Frame from a 2104 Model TU3 (2)
Chapter 3. Removal and Replacement Procedures 113