Product data

Step 10. Replace parts in the reverse sequence.
Notes:
a. Ensure that, in the replacement frame assembly, each SCSI interface
card assembly occupies the position that it occupied in the original frame
assembly.
b. If you have installed a replacement frame assembly, attach the blank
self-adhesive serial-number label that is supplied with the frame
assembly. The new label must cover the original label (see Labelson
page 22).
c. Write the serial number of the original frame assembly onto the blank
label.
d. Destroy the serial number on the original frame assembly.
Step 11. Go to MAP 2410: 2104 Repair Verificationon page 65 to verify the repair.
Chapter 3. Removal and Replacement Procedures 111