Product data

Step 5. Refer to Figure 48.
Step 6. Pull the switch card assembly out from the 2104.
Note: For a translation of the following notice, see “Appendix D. Translated
Safety Notices” on page 167.
CAUTION:
Do not insert hands or tools into the space that contained the switch
card assembly.
Step 7. If you are installing a different switch card assembly, ensure that its switch
settings match those of the original switch card assembly. (See also “Switch
Card Assembly Switches” on page 9, if necessary.)
Step 8. Replace parts in the reverse sequence.
CAUTION:
As you push the assembly fully home, the lever automatically moves
toward its closed position. Ensure that your fingers do not become
pinched between the lever and the assembly.
Note: If the 2104 is switched off, it might switch on when you reinstall the
switch card assembly.
Step 9. Go to “MAP 2410: 2104 – Repair Verification” on page 65 to verify the repair.
Figure 48. Removing the Switch Card Assembly
Chapter 3. Removal and Replacement Procedures 105