Product data

Step 7. Refer to Figure 45.
Step 8. Pull the SCSI interface card assembly out from the 2104.
Note: For a translation of the following notice, see “Appendix D. Translated
Safety Notices” on page 167.
CAUTION:
Do not insert hands or tools into the space that contained the SCSI
interface card assembly.
Step 9. Replace parts in the reverse sequence.
CAUTION:
As you push the assembly fully home, the lever automatically moves
toward its closed position. Ensure that your fingers do not become
pinched between the lever and the assembly.
Note: When you reconnect the SCSI cable, ensure that its connector is
correctly aligned with the connector of the SCSI interface card
assembly. Otherwise, you might bend the pins. Engage the connectors
carefully.
Step 10. Using the method that is provided on your using system, check the level of
microcode that is present on the SCSI interface card that you have just
installed. Additional information about the latest levels of SCSI interface card
microcode is given on the web support page (see “Web Support Page” in
Figure 45. Removing the SCSI Interface Card Assembly
100 2104 Service Guide