Product data

Step 8. Replace parts in the reverse sequence.
Notes:
a. When you insert the fan-and-power-supply assembly, you might hear the
speed of the other fan decrease.
Note: Remember to set the DC On/Standby switch to On after you have
reinstalled the fan-and-power-supply assembly. If the DC On/Standby
switch is already set to On when you reinstall the fan-and-power-supply
assembly, the CHK light might come on. If it does, set the DC
On/Standby switch to Standby, then to On.
Step 9. Go to “MAP 2410: 2104 – Repair Verification” on page 65 to verify the repair.
Chapter 3. Removal and Replacement Procedures 93