Service manual

– 16 –
WA1
RM-Y1108
Technical Specifications
Design and specifications are subject to change
without notice.
This instruction manual has been printed on:
Ecological Paper - Totally Chlorine Free
Panel System: LCD (Liquid Crystal Display) Panel TV System: (Depending on the Country/region selection) B/G/H, D/K, L, I Colour System: PAL, SECAM NTSC 3.58, 4.43 (Only Video In) Aerial: 75 ohm external terminal for VHF/UHF Channel Coverage: (Depending on the Country/region selection) VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 Screen Size: 20 Inches (approx. 51 cm. measured diagonally) Display Resolution: 640 dots (horizontal) x 480 lines (vertical) Power Requirement: 220-240V AC; 50/60 Hz Power Consumption: 65 W Standby Power Consumption: 0.5 W Sound Output: 3 W Dimensions (w x h x d): With stand, approx. 504 x 509 x 250 mm. Without stand, approx. 504 x 467 x 111 mm. Weight: With stand, approx. 9 Kg. Without stand, approx. 7 Kg.
Rear Terminals:
• AV1: 1/
21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/ video output.
• AV2: 2/ (SMARTLINK)
21-pin Scart connector (CENELEC standard) including audio/video input, S video input, selecta- ble audio/video output and Smartlink interface.
• Audio Outputs (left/right) – phono jacks. • Aerial connector (RF In)
Side Terminals:
• AV3:
3 S video input (4-pin mini DIN)
3 Video input (phono jack)
3 Audio input (phono jacks)
• headphones jack
Accessories supplied: One Remote Control (RM-Y1108), Two Size AA batteries (R6 type), One Mains lead (Type C-6) One Mains lead (Type BF) Other Features: • Teletext, Fastext, TOPtext (depending on
availability)
• Sleep Timer • Picture Freeze • Smartlink (Direct link between your TV and a
compatible VCR or DVD recorder. For more information on Smartlink, please refer to the instruction manual of your VCR or DVD recorder.)
• TV system autodetection
This TV is compatible with the VESA universal wall stand system.
S
S
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem Possible solution No picture
No picture (screen is dark) and no sound. • Check the aerial connection.
• Connect the TV to the mains, and press the power switch on the
top side of the TV set.
• If the (standby) indicator is on, press TV on the remote
control.
The TV turns off automatically. (The TV enters the standby mode.)
• Check if the Sleep Timer is activated (page 34).
No picture or no menu information from equipment connected to the Scart connector.
• Check that the optional equipment is on and press the /
button repeatedly on the remote control until the correct input symbol is displayed on the screen (page 38).
• Check the connection between the optional equipment and the TV.
Poor picture/Unstable picture
Double images or ghosting. • Check aerial/cable connections.
• Check the aerial location and direction.
Only snow and noise appears on the screen.
• Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (3-5
years in normal use, 1-2 years at the seaside)
Dotted lines or stripes. • Keep the TV away from electrical noise sources such as cars,
motorcycles, or hair-dryers.
No colour on colour programmes. • Using the menu system, select the “Picture Adjustment” menu and
select “Reset” to return to the factory settings (page 26).
• If you set the “Power Saving” function to “Reduce,” picture colours
may become dimmer (page 28).
Some tiny black points and/or bright points on the screen.
• The picture of the display is composed of pixels. Tiny black points
and/or bright points (pixels) on the screen, do not indicate a malfunction.
The picture is too bright.
Picture (stripe) noise.
• Using the menu system, select the “Picture Adjustment” menu and
select “Picture Mode” Then select the desired picture mode (page 25).
• Make sure that the aerial is connected. • Keep the aerial cable away from other connecting cords. • Do not use 300-ohm twin lead cables as interference may occur.