User guide

P. 11 User Guide
To exit cold weather mode, do any one of the following actions:
• Open the hood.
• Start the engine by remote.
• Turn the ignition key to the IGNITION ON (RUN) position.
• Press the brake pedal.
• Press and hold the START/STOP button for 3 seconds (the parking lights will flash once).
When the system exits cold weather mode, the icon will disappear after pressing the LOCK or
ULOCK buttons.
Temporary chirp delete
To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
1. Press the TRUNK button.
2. Within 3 seconds, press the LOCK or UNLOCK button to arm or disarm without any chirps.
Advanced Features: Installation-programmable Options
The system was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your system.
The installation-programmable options are as follows:
• Remote Door Locks
• Priority Door Access
• Passive or Active Arming
• Starter Kill / Anti-grind feature
• Shock Sense and Warn-away
• Disarmed Notification
• Siren / Horn Chirps
• Car Finder
• Siren / Horn Chirp Timing
• Safe Start
• Ignition-controlled Door Locks
• Ignition Re-lock
• Secure Lock
• Turbo Mode
• Remote Trunk Release
• Engine Run Time
• Multi-car Operation
Remote Door Locks
If your system was installed with the remote door locks option, you will have the convenience of
remote keyless entry. See section arming and disarming the system, earlier in this guide, for further
instructions on remote door locking and unlocking.
Priority Door Access
If the Remote Door Locks option is installed on your vehicle, this safety feature allows you unlock
solely the driver’s door with a single press of the UNLOCK button on the transmitter; upon a second
press of the UNLOCK button, all the other doors will unlock.
Active or Passive Arming
The alarm and starter kill can be configured either to passive mode (so as to arm automatically) or
active mode (so as to require user intervention for arming). By default, your system is configured to
passive mode. In passive mode, the alarm and starter kill will automatically arm 30 seconds after
the last door is closed. The system will not arm if a door is left open, or if you re-open a door within
the 30-second delay.
Important: When the system re-arms automatically or if there is an alarm condition, you can
disarm the system by simply pressing the UNLOCK button.
The Starter Kill and the Anti-grind Feature
With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the starter kill is armed. If your system was installed with the starter kill option, one will