Installation guide

P. 12 Installation Guide
FUNCTION 4 Turbo Mode
OPTION 1 Turbo Mode ENABLED
OPTION 2* Turbo Mode DISABLED
OPTION 3 Turbo Mode DISABLED
FUNCTION 5 Engine type and Cold Weather Mode
OPTION 1 Diesel Mode with 20-minute Run Time in Cold Weather Mode
OPTION 2* Gas Mode with 4-minute Run Time in Cold Weather Mode
OPTION 3 Diesel Mode with 9-minute Run Time in Cold Weather Mode
MODE 3 * INDICATES DEFAULT SETTING
FUNCTION 1 Siren (or Horn) Chirps
OPTION 1 Warning Chirps
OPTION 2* Full chirps ENABLED
OPTION 3 Chirps ENABLED with Open Zone Notification
(Siren warning 10 sec. after arming if a door is left open)
with Lock Confirmation when the LOCK button is pressed for a 2
nd
time
OPTION 4 Chirps DISABLED
with Lock Confirmation when the LOCK button is pressed for a 2
nd
time
FUNCTION 2 Passive or Active Arming
OPTION 1 ACTIVE Arming.
OPTION 2* PASSIVE Arming (30 sec.)
OPTION 3 PASSIVE Arming (30 sec.), no Siren Mute
OPTION 4 DISARMED NOTIFICATION enabled (chirp if a Door is left open)
FUNCTION 3 Siren Mode / Horn Mode
OPTION 1 Siren DISABLED
OPTION 2* Siren ENABLED
OPTION 3 Horn DISABLED
OPTION 4 Horn ENABLED
FUNCTION 4 Shock Sense / Warn-away
OPTION 1 Shock Sense IGNORED / Warn-away IGNORED
OPTION 2* Shock Sense MONITORED / Warn-away MONITORED
OPTION 3 Shock Sense MONITORED / Warn-away IGNORED
OPTION 4 Shock Sense IGNORED / Warn-away MONITORED
FUNCTION 5 Ignition Valet
OPTION 1 Ignition Valet DISABLED
OPTION 2* Ignition Valet ENABLED
OPTION 3 Ignition Valet ENABLED
Tach Programming
About Tach Programming
If you press the START/STOP button before carrying out a Tach Programming procedure, the System
will make no attempt to start the Engine and the Parking Lights will give 5 flashes. If order to carry
out Tach Programming, you may simply follow the Automatic Tach Programming procedure. The
System stores Tach settings regardless of the procedure used at the time of Tach programming.
All Tach settings are cleared when the System is reset. A new Tach Programming procedure has
to be carried out only if the System is reset.