Specifications

• If you did not specify the -s option, information may still remain on the agent. Perform a cold start manually
for JP1/AJS3 on the agent.
jpomanevshow command
Check the following and then re-execute the command:
• Check whether the system resources are sufficient.
• Check whether the permission environment of the starting user is correct.
• Check whether the directory created during installation of JP1/AJS3 was deleted unintentionally.
KAVT8343-W
An attempt to communicate with the agent has failed. (agent-host-name) (maintenance-information,
IPAddress=IP-address
#
)
An attempt to communicate with the agent indicated in
agent-host-name has failed.
#
The IP address is output only when the LOGIPV6INFOALL environment setting parameter is set to yes. If the
LOGIPV6INFOALL environment setting parameter is set to yes and the IP address is unknown, unknown is
displayed.
(S)
Continues execution of the command. However, information on the agent may remain undeleted.
(O)
Check the following:
• Check whether the agent host and JP1/AJS3 have started.
• Check whether the host name is determined.
If it has not, check the settings of the JP1_HOSTNAME environment variable, the hosts file, or the DNS server.
• Check whether the JP1/AJS3 port number is registered in the services file.
If it is not registered, register it.
Since the information on the agent where the error occurred is not deleted, you must perform a cold start for the
JP1/AJS3 service on the agent, as required. Additionally, make sure that the specified agent host exists and is running.
KAVT8347-E
A required option (
option) is missing.
A required option was omitted.
(S)
Cancels execution of the command.
(O)
Specify the required option indicated in the message and then re-execute the command.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
779