Specifications

(S)
Sufficient resources for performing the next monitoring are not available. The system abnormally terminates the
Interval Control job.
(O)
Check the following:
• Check whether system resources are sufficient.
After the check, use JP1/AJS3 - View to check the event job that caused the error, and then re-execute that job.
KAVT7016-W
A macro variable exceeds 4096 bytes.
A converted macro variable has exceeded 4,096 bytes.
(S)
Truncates the portion after the 4,096th byte and continues processing. The maximum value for macro variables is
4,096 bytes.
(O)
The portion of the macro variable exceeding the 4,096th byte is not passed to the succeeding jobnet or job. Check
the status of the jobnet or job. If you find any problem, recheck the definition of the job.
KAVT7017-I
Timer (none condition) is over.
The Interval Control job terminated before the wait time expired because the option that causes monitoring to expire
immediately after it starts is enabled for the Interval Control job.
(S)
Terminates processing.
KAVT7501-E
Invalid parameter specification. (specified-parameter)
An incorrect parameter is specified in the hp OpenView Status Report job.
(S)
Cancels processing.
(O)
Check the definition of the specified parameter, and then retry.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
757